Solar Panels Perth

Is a 6.6 kW Solar System Still the Right Size for Perth When the Average Is Now 10.5 kW?

Short answer: a 6.6 kW system is still a sensible size for a small, daytime-light Perth household without a battery, but it is no longer the default. The Clean Energy Regulator reports the average new rooftop system in Australia was 10.5 kW in the June quarter of 2026, and 15 to 40 kW systems made up 26% of installations. If you plan a battery, an EV or an all-electric home, 10 kW or more usually makes better use of your roof and the 2026 connection rules.

Why 6.6 kW became the standard

For years, many single-phase homes on Perth's grid were limited to a 5 kW inverter. Installers could put up to 6.6 kW of panels on a 5 kW inverter, because the panels rarely produce their full rating. So 6.6 kW became the default quote across Perth.

That limit has changed. From 1 May 2026, Energy Policy WA allows up to 30 kVA of inverters on a standard connection, an increase of 15 kW for single-phase homes, provided the system can be remotely managed by the retailer or export is limited to 1.5 kW.

What drove the jump to 10.5 kW

According to the Clean Energy Regulator's June quarter 2026 report:

  • More than 80% of solar installations in April 2026 were paired with a battery
  • Larger systems are needed to fill bigger batteries
  • Households are replacing older, smaller systems; replacements were about 25% of solar installations

Batteries changed the maths. Without storage, extra panels mostly add exports at 2c per unit under DEBS. With a battery, those units can replace evening power costing up to 55.3253c on Synergy's Midday Saver plan.

Output by system size in Perth

Using a typical Perth yield of about 1,450 to 1,550 units per kW per year, based on the Bureau of Meteorology's annual average solar exposure of 19.0 MJ/m² per day at Perth Airport:

System size Approx. annual output Approx. daily average Approx. June day
6.6 kW 9,600 to 10,200 units 27 units 13 units
10 kW 14,500 to 15,500 units 41 units 20 units
13 kW 18,900 to 20,200 units 53 units 26 units

June figures are estimated from the Bureau's June average of 9.3 MJ/m² per day, roughly half the annual average. Real output depends on orientation, shading and panel quality.

STCs by size

Solar STCs use Perth's zone 3 rating of 1.382 and a deeming period of 5 years in 2026:

  • 6.6 kW: 45 STCs, about $1,800 at $40
  • 10 kW: 69 STCs, about $2,760
  • 13 kW: 89 STCs, about $3,560

The discount grows with system size, which helps offset the cost of extra panels.

When 6.6 kW still makes sense

  • A one or two person household with low use
  • No plan to add a battery or EV
  • A small or heavily shaded roof
  • A tight budget where payback speed matters most
  • An existing 5 kW inverter you do not want to replace yet

When to go bigger

  • You plan a battery now or within a few years
  • You will charge an EV at home
  • You have or plan a heat pump hot water system
  • You want enough winter output to fill a battery
  • You run a pool pump or ducted air conditioning

Winter is the real test

A 6.6 kW system produces about 13 units on an average June day. A household using 8 units during daylight leaves only 5 to charge a battery. A 10 kW system leaves about 12. If your evening and overnight use is 10 to 12 units, the smaller system will rarely fill a battery in winter.

Mind the export limits

Bigger systems export more on mild days. Under the 2026 rules, systems that are not remotely managed are limited to 1.5 kW of export. Even with remote management, there may be rare times when output is reduced. Self-use, batteries and load shifting make the extra panels pay.

Adding to an existing 6.6 kW system

If you already have 6.6 kW, you do not always need to replace it. A second array with its own inverter, or a hybrid inverter with a battery, can be added. Any upgrade must meet the 2026 rules, so check what that means for the existing system before signing.

A quick decision guide

  1. Write down daytime use, evening use and future plans.
  2. Check roof space for north, west and east panels.
  3. If a battery is planned, size panels to fill it on most winter days.
  4. Confirm the inverter size and connection rules.
  5. Compare price per watt between quotes.

Specifications for a 13 kW solar panel system show what a larger array involves. Installers such as Fusion Sun Solar in Perth can compare sizes against your bill, and this Perth solar system sizing checklist has more planning tips.

Frequently asked questions

Why did 6.6 kW become so common?

It was the largest practical panel size on the old 5 kW single-phase inverter limit.

What is the average solar system size in 2026?

10.5 kW in the June quarter, according to the Clean Energy Regulator.

Is 6.6 kW enough to charge a battery?

In summer, often yes. In winter, usually not for a 10 kWh battery.

Do bigger systems get more STCs?

Yes. STCs scale with system size, up to the scheme limit.

Conclusion

6.6 kW is no longer the automatic answer for Perth. Look at winter output, future plans and the new connection rules, then size the system for the home you will have in five years.